Managed IT & Support
Business Data Backup
Cloud Solutions
Incident Response Services
IT Help Desk Services
Network Installation Services
Microsoft 365 Support
Cyber Security Services
IT Compliance Services
Healthcare IT Support
Technology Consulting
Construction IT Support
Mobile Device Management
Managed Detection and Response
Law Firm IT Support
Network Support Services
Good cabling is the part of your network nobody sees until it fails. You get clean, tested, labeled runs in your Atlanta office, installed by one team that also supports the network on top of it.
Get a Free IT AssessmentNetwork cabling is the physical wiring that connects your computers, phones, printers, access points and cameras to your network. It runs through ceilings, walls and floors, ends at wall jacks and lands in a patch panel. When it is done well, you never think about it. When it is done badly, you get slow connections, random drops and problems nobody can explain.
Most cabling trouble comes from the same few causes. Cables were bent too sharply or run next to power lines. Jacks were never tested. Nothing was labeled, so every change turns into guesswork. Or the office grew, and someone added a cheap switch under a desk to make room. Each of these is fixable, but it is far cheaper to do the job right the first time.
A proper job starts with a walkthrough. We look at your space, count the drops you need and plan for the ones you will need later. We pick the right cable for each run, pull it cleanly, terminate it, test every line and label both ends. You get a simple map of what goes where. That map saves hours the next time anything changes.
Atlanta buildings vary a lot. A 1960s office on Peachtree needs a different approach than a new suite in Midtown or a warehouse near the airport. Older buildings often have tight ceilings, crowded risers and wiring from several past tenants. Newer towers have strict rules about who can work where and when. Knowing how to handle both saves time and avoids surprises.
Cabling also lasts. Good cable in the wall can serve your office for ten years or more, through several rounds of new switches and Wi-Fi. That makes it worth planning once and doing it right. Because the same team supports your network afterward, nobody blames the cabling when something breaks. If a line fails, the test results and the labels tell us exactly where to look.
Everything below is part of one monthly plan. Pick a topic to see what is handled for you and how it works in a Atlanta office.
We visit your space, look at the ceiling, the closets and the path each run will take. We count desks, printers, access points, cameras and conference rooms. Then we add the drops you will want in a year or two, so you are not reopening walls later.
You get a written plan with drop counts, cable types, rack layout and a fixed price. Nothing is guesswork. If the building has rules about access hours or approved contractors, we sort that out with property management before the work starts.
Most offices run on Cat6 or Cat6A copper cable. It carries fast wired connections to desks, phones, printers and Wi-Fi access points. We pick the grade that fits your needs and budget, and we keep runs within proper length limits.
Each cable is pulled without sharp bends, kept clear of power lines and terminated at a wall jack and a patch panel. Every line is tested before we call it done. You get the results, so you know each drop performs as it should.
When you need to connect floors, closets or separate buildings, fiber is often the better choice. It carries more data over longer distances and ignores electrical noise. Warehouses, campuses and multi-suite offices often need it.
We plan the route, install the fiber, terminate and test it, and connect it to your switches. For many offices, a short fiber backbone between closets and copper to the desks is the right balance of speed and cost.
Wi-Fi is only as good as the cable behind it. Every access point needs a solid wired line back to the switch, usually Cat6 or Cat6A. Poor cabling to an access point shows up as slow or dropping wireless for everyone nearby.
We place drops where the access points will actually go, based on your floor plan and how people use the space. That gives the wireless team clean mounting spots and reliable power and data from day one.
A tangled network closet slows every repair. We install racks and patch panels, route cables neatly, label every port and tidy the mess left by earlier changes. Cooling and power get a quick check too.
If you are moving, we build the new closet before your team arrives, so the network is ready on day one. We also handle cabling for office moves, including removing old cable that the lease requires you to take out.
Lots of companies can fix a computer. These are the reasons Atlanta businesses give for choosing Stack Atlanta and sticking with us.
Our team knows which Midtown towers need paperwork before anyone enters the riser room, how summer storms affect power across the metro and how long it really takes to get from Downtown to Alpharetta at 5 p.m. That local knowledge turns into faster, calmer fixes.
Your network, devices and backups are watched day and night. Most problems are handled before anyone notices, and you get a plain explanation when something needs your decision.
A free assessment ends with a per-user quote listing every included service. No hourly surprises, no unexpected after-hours charges and no fine print about what counts as extra.
Cabling jobs look different from one part of the city to the next. Here is how the work usually plays out in the areas we serve.
Downtown offices sit in older towers with shared risers and strict building access. Managed IT here means coordinating with property management, keeping remote access reliable for MARTA commuters and scheduling heavier work after hours.
Law firms, agencies and tech teams in Midtown run on fast Wi-Fi, video calls and secure file sharing. They need dependable networks in busy high-rises and tight access control for client data.
Wealth managers, insurance agencies and professional offices in Buckhead hold sensitive financial data. Managed IT keeps that data protected, backed up and documented for audits and insurers.
Creative studios and startups in converted buildings along the BeltLine grow quickly and work from anywhere. Managed IT keeps onboarding simple and separates guest Wi-Fi from the business network.
Design firms, showrooms and production companies in West Midtown move large files every day. They need strong networks, solid backups and workstations that keep up with demanding software.
Corporate offices and medical groups around the Perimeter often connect several locations. Managed IT monitors those links and gives every site the same help desk.
Fast-growing tech and fintech companies in Alpharetta add people every month. Managed IT makes every new hire’s laptop, accounts and access ready before the first day.
Clinics, nonprofits and small professional offices in Decatur need dependable systems without a big IT budget. A managed plan covers updates, backups and security for one monthly fee.
Regional offices near the Galleria and The Battery often support staff across the northwest suburbs. Managed IT keeps those offices connected and supported without long waits for a visit.
Cabling can be done several ways. The differences show up later, when something stops working or you need to make a change.
| Topic | Stack Atlanta | General Electrician | DIY or Office Handyman |
|---|---|---|---|
| Cable testing | Every line tested with results provided | Often a quick continuity check | Rarely tested |
| Network knowledge | Planned around switches & Wi-Fi | Strong on power, lighter on data | Depends on the person |
| Labeling & documentation | Labeled ports & a simple map | Sometimes labeled | Usually none |
| Rack & closet work | Clean, organized & documented | Basic mounting | Often tangled or improvised |
| Ongoing support | Same team supports the network | Not usually offered | None |
| Planning for growth | Spare drops & capacity built in | Only what you ask for | Usually the minimum |
| Typical cost | Fixed quote per project | Hourly or per-drop | Lowest upfront, highest later |
Solid wiring removes a whole category of problems before they start.
Properly run and tested cable keeps speeds consistent for every desk and device.
Labeled jacks and a clean rack mean moves and additions take minutes, not hours.
Tested lines rule out the cable when something goes wrong, so fixes are faster.
Extra drops and spare capacity let you add staff and devices without opening walls.
Different businesses need different wiring, and these related services pair well with a cabling project.
Switches, firewalls & Wi-Fi installed on top of solid cabling.
Business Wi-FiAccess points placed and wired so wireless stays fast in every room.
Office MovesCabling, closets & equipment ready before your team arrives.
Network MonitoringAlerts on failing links & overloaded switches before staff notice.
With our old provider, a broken laptop meant a ticket and a long wait. Now somebody picks up right away and most problems are gone before the call ends. The constant IT complaints in our office simply stopped.
We were worried about changing providers during our busiest season. The handover took about three weeks, email and files never stopped working and we received full documentation at the end.
Every repair used to come with its own invoice. Now it is one monthly amount, a short report and a conversation about upgrades before anything breaks. Budgeting for IT finally makes sense.
After a free assessment, you get a written quote with drop counts, cable types and a fixed price. No surprises.
Most projects are priced per drop, plus the rack and any fiber. Costs depend on distance, ceiling access and building rules. A small office typically costs far less than a floor build-out. A free walkthrough gives you a fixed written quote.
Cat6 fits most offices and is cost effective. Cat6A handles higher speeds over longer runs and suits new builds or heavy data use. If you expect to be in the space for years, Cat6A can be a smart choice. We recommend by need.
A small office is often done in a day or two. A full floor or a warehouse can take a week or more. Most of the time depends on ceiling access, building hours and how many drops you need.
Yes. Many Atlanta office buildings limit noisy or disruptive work during business hours. We can schedule evenings or weekends so your staff keep working. We also coordinate with property management for access and elevator use.
Yes. Some leases require abandoned cable to be removed, and old bundles can block new runs. We can clean out unused cable, label what stays and leave the closet tidy. This is included in the scope when needed.
Usually not for every desk. Copper handles most office needs well. Fiber makes sense between floors, between buildings or when you need long, fast links. We will tell you honestly if copper is enough.
Often yes, but older cable may limit newer access points. We test what you have and tell you if it can support your Wi-Fi. If not, we plan upgrades only where they are needed.
Yes. Every run is tested, and you get the results. Testing proves each drop works and meets its rating. It also gives us a baseline if a problem appears later.
Yes. Small additions are common. We find the closest closet, run new cable, terminate and test it, and add it to your labeling. It is usually quick and does not disrupt the rest of your network.
Many Atlanta towers require insurance certificates, approved hours and notice for work. We handle the paperwork and coordinate with building management. That keeps your project on schedule and avoids last-minute delays.
Need something slightly different? These services cover the same ground from another angle.
A free assessment shows what is in your walls, what needs fixing and what it would cost.